BRNFR - TRANSUL CUT 711

  • MSDS: BRNFR
  • Manufacturer: G C LUBRICANTS CO
  • Product Name: TRANSUL CUT 711
  • National Stock Number: 9150-00N042874
Product Identification

Product ID:TRANSUL CUT 711
MSDS Date:02/01/1991
FSC:9150
NIIN:00N042874
MSDS Number: BRNFR

Responsible Party
G-C LUBRICANTS CO
977 BRANSTEN RD
SAN CARLOS, CA 94070
US

Emergency Phone: 415-592-1050;800-424-9300(CHEMTREC)

Info Phone: 415-592-1050

Cage: 0HJB5

Contractor
G-C LUBRICANTS COMPANY
SAN CARLOS, CA 94070 US

Telephone: (415) 592-1050

Cage: 0HJB5

Ingredients

NON-HAZARDOUS INGREDIENTS (ACCORDING TO 29 CFR 1910.1200C,

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NO HISTORY OF HEALTH HAZARDS
WITH THIS PRODUCT. CHRONIC: PROLONGED AND REPEATED SKIN CONTACT MAY
CAUSE IRRITATION/DERMATITIS. CHEMICALS KNOWN TO STATE OF CA TO
CAUSE CANCER, BIRTH DEFECTS OR OT HER REPRODUCTIVE HARM, MAY BE
FOUND IN PETROLEUM PRODUCT, INCLUDING LUBRICANT-BASED OILS AND
DERIVED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:PRODUCTS THAT ARE MANUFACTURED BY G-C
LUBRICANTS, INCLUDING THE PRODUCT CONTAINED HEREIN. G-C LUBRICANTS
HAS BEEN ADVISED THAT METAL DRUMS OR PAILS USED BY G-C LUBRICANTS
ARE MADE FROM CHEMIC ALS KNOWN TO THE STATE OF CA TO CAUSE CANCER,
BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
Medical Cond Aggravated by Exposure:NO KNOWN CONDITIONS.

First Aid

First Aid:INHAL:UNDER FIRE CNDTNS, MOVE VICTIM AWAY FROM AREA TO FRESH
AIR. RESUSCITATE & ADMINISTER O2. CONSULT MD. EYES: IMMED FLUSH
W/PLENTY WATER FOR @ LEAST 15 MIN. HOLD EYELIDS APART TO INSURE
FLUSHING OF ENTIRE EYE. SEE MD. SKIN:WASH ALL CONTAM SKIN AREAS
W/PLENTY SOAP & WATER. WASH ALL CONTAM CLTHG BEFORE RE-USE.
INGEST:DO NOT INDUCE VOMIT. NEVER GIVE ANYTHING BY MOUTH TO UNCON
PERSON. CONSULT MD.

Fire Fighting

Flash Point:340F,171C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:MATL SHOULD BE TREATED AS OIL WHEN
EXPOSED TO FIRE. OVERPRESSURIZATION WILL OCCUR WHEN CONTAINER IS
EXPOSED TO FIRE. USE WATER TO COOL FIRE-EXPOSED CONTAINERS.

Accidental Release

Spill Release Procedures:CONTAIN WITH ABSORBENT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:USE NORMAL GOOD PRACTICES.
Other Precautions:DO NOT INGEST. WASH ALL CONTAMINATED CLOTHING BEFORE
RE-USE.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . NONE REQUIRED FOR NORMAL OPERATIONS.
Ventilation:APPROPRIATE. LOCAL EXHAUST SUGGESTED. MECHANICAL IS
ACCEPTABLE.
Protective Gloves:NITRILE GLOVES.
Eye Protection:CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:NONE REQUIRED FOR NORMAL OPERATIONS.
Work Hygienic Practices:ALWAYS WASH HANDS PRIOR TO SMOKING OR EATING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:550F,288C
Vapor Pres:<1
Vapor Density:>1
Spec Gravity:0.93 (H2O=1)
Evaporation Rate & Reference:<1 (BUTYL ACETATE =1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK BROWN LIQUID.
Percent Volatiles by Volume:0.0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS SUCH AS NITRIC ACID, HYDROGEN PEROXIDE AND
CHROMIC ACID.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FIRE YIELDS CARBON MONOXIDE AND CARBON
DIOXIDE.

Disposal

Waste Disposal Methods:INCINERATE OR BURY IN A LICENSED CHEMICAL WASTE
DISPOSAL SITE OR DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.